imagedude Posted February 5, 2007 Share Posted February 5, 2007 Here are some of my stakes, most came from a technical college which was closing. Quote Link to comment Share on other sites More sharing options...
scrapman1077 Posted February 5, 2007 Share Posted February 5, 2007 Impresive ! Show us some of the work you have done with them. Quote Link to comment Share on other sites More sharing options...
imagedude Posted February 5, 2007 Author Share Posted February 5, 2007 Here's a small car part I made using 'buck forming'. The buck is the red piece. Here I'm forming a panel on an English Wheel. Quote Link to comment Share on other sites More sharing options...
sfDuck Posted August 6, 2007 Share Posted August 6, 2007 Wow, thats quite the sellection; could you pick a few stakes out for beginners and what they are used for. And more shots of the English wheel, someone might try to make one. Duck Quote Link to comment Share on other sites More sharing options...
Bentiron1946 Posted August 7, 2007 Share Posted August 7, 2007 That is wonderful set of stakes. I envy you. I give you joy. Quote Link to comment Share on other sites More sharing options...
imagedude Posted August 8, 2007 Author Share Posted August 8, 2007 Plenty of good tinner's books here:The Sheet Metal Shop .Com Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.