Mulekick Posted January 2, 2011 Share Posted January 2, 2011 Here are some pictures of a scroll bender I made. At first it was just a scroll welded to a plate and the plate welded to an angle and set in the vice. I had about 240 plus scrolls to make and it seemed like it was taking forever so I bolted a 3/4" flange bearing to the plate and welded 3/4" round stock to the angle and set it in the vice. I put a trailer jack crank handle on the top. I'm only bending 1/4 x 1/2 flat bar and it works great. Before I knew it I was done. The last picture is one of the end results of the scroll bending. Quote Link to comment Share on other sites More sharing options...
MRobb Posted January 2, 2011 Share Posted January 2, 2011 Looks like a great idea. The end result looks really nice. Any pics a little clearer? I'm trying to figure out exactly how it's set up. Thanks for posting. Mitch Quote Link to comment Share on other sites More sharing options...
Mulekick Posted January 2, 2011 Author Share Posted January 2, 2011 Sorry about the pictures Mitch, I will try to get some better shots tomorrow. ( if I dont foreget} Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.