TRIPP Posted December 8, 2009 Share Posted December 8, 2009 (edited) Any ideas where to look for dies for aN e sEiErs fairbanks hammer. 150 lb?? Edited December 8, 2009 by TRIPP SPELLING MISTAKE Quote Link to comment Share on other sites More sharing options...
SGropp Posted December 8, 2009 Share Posted December 8, 2009 If you can provide accurate measurements of your sow block and ram dovetails , either Sid at Little Giant or Bob Bergmam at Postville Blacksmith Shop can machine and heat treat new dies for your hammer at a fair price. I've had good luck from both places. Quote Link to comment Share on other sites More sharing options...
Dan Seaver Posted December 10, 2009 Share Posted December 10, 2009 The only way to get dies for a Fairbanks E is to have them custom made and its not cheap since they are so big. The quotes I've gotten were $800-$2000 for a pair. If you want I can get die measurements on the my hammers dies. I don't remember the dovetail measurements but the metal block needed for each is 6"x8"x4" (or maybe 4.5", not sure.) Heck I can even make a CAD drawing for you with all the measurements. Quote Link to comment Share on other sites More sharing options...
brucegodlesky Posted December 10, 2009 Share Posted December 10, 2009 I have a set of dies for an A. I'll get the measurements and we'll see how they match up. They may be too small for yer E Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.