Iron Fangs

Thanks to Daswulf (again. Thank you very much) I have been able to get my hands on a proper anvil stand and a forge that won't crumble when I build a fire in it, today I added a pitchel hole to the anvil stand with a little improv

External? My plan was internal frame like a canopy tent, so more external like a camping tent?

I'm going to try my first plan and just angle the roof a bit more, if it proves to not be stable then I've learned a lesson. And if it works then good!

Yeah, I was originally going for a Baker tent set up, the amount I bought would have probably worked for that

I'll look around for some, I always get home after dark on weekdays

I'll put in the extra work then, PA has no shortage of Maple trees

I'm sure he has been told once or twice? I have (roughly) 160 square feet of Canvas sheet, and I am now going to need to source poles, my goal is cheap and effective, and my options are PVC pipe and cut saplings (which are free but time consuming to fine proper candidates that are legal to cut down)

An interesting idea, seems like it would be more simple to construct and a bit more efficient too maybe?

I agree, that's why I am putting so much emphasis on it being able to be taken down in the design, until I actually own my property and can build a permanent structure that will hold up to wind and snow (saw a lovely Gazebo that would make a nice outdoor smithy yesterday) a well supported pop-up is my best bet. Yo help with the snow accumulation my plan is to make one side 2 feet higher than the other with a slope to encourage it to slide off (not going to be perfect but hey, I'm not the carpenter my dad was) That said, I will gladly take some advice or design recommendations!

Update: I made a small paper model of my idea and figured out how I am going to stabilize it and keep it portable, attach brackets to the poles and fashion 3 removable horizontal support beams to keep it upright

I got some Canvas, four 6'x9' sheets, my intention is to use one as a roof, and sew two of them as walls to leave walls open for ventilation, my idea is to make a sloped roof with the high side being 8' and the low side being 6', and I'm thinking I'll need to cut saplings so thst I have two 8', two 7', and two 6' to keep it stable, with some creating sewing and using the fourth sheet to patch where needed to keep it together I should have myself a nice little pop up tent I can take down in extreme weather. I'm basing my design off a Baker tent setup

Speaking of books I just picked up "the Backyard Blacksmith" by Lorelei Sims and have been reading through it

I'm moreso using the suggestion of materials and trying to make myself a nice little pop-up shop I can stuff in the shed when I'm expecting a blizzard or thunderstorm that would blow my setup halfway across the greater Pittsburgh area, some saplings as tent posts due to how many Maple trees like to spring up around my area. The canvas to keep the rain and snow off my hearth, and probably some sort of makeshift foot on the poles to help keep it stable, I got some sandbags I can weigh the posts down with It's also worth mentioning that where I'll be doing most of my forging is several hundred feet above the nearest body of water

On another note, I am going to assemble myself a smithy tent because i am tired of rain, I think I'll be using the example set by Jake Pogrebinsky in another thread using a 15x12 canvas sheet and a few saplings

And there solves a mystery from my childhood