Jreed

I don't know from cubic inches. How tall, how wide, how deep? What type of construction?

I am using a 5gal steel paint bucket with 2" of insulation on the sides 4" in the back (simply to take up space) cylindrical interior dimensions after insulation 7" across X 10" deep. KAOwool insulation with a coating of Plistix 900(sp?), heavy brick bottom, sealed rear( for now).

Brian
I have a shed that I plan on running this in so windy conditions are not a big concern but I can see how they could hinder performance now that you pointed it out.

Still new at this. Thanks for the imput.

Hey all been lurking for awhile and am finally getting together all of my supplies for a forge. I have been looking at a few burner designs and found one that fits in with my limited tool inventory but wanted some opinions on this one that i found in the blue prints BP0191 3/4" Burner for a Gas Forge | Blueprints 100-200 in my research i have seen similar designs that have worked well for others. I know performance of a burner can change with the smallest change in design so I know it wont perform exactly like similar ones just looking to see if this will do for a 350cin set up. Thanks for all comments in advance.

Thanks for the welcome Gents. I plan on doing allot of reading before I start asking questions.

I dont know jack squat about black smithing. But I am willing to learn. It has always been something I have been interested in and someone I know from another forum directed me here.