-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by Fellini
-
-
Thank you folks for the help on this issue. The Google’s copper brushes are not really copper (they are brass).I couldn't find pure Cupper brush. I really want to try the bronze brush. Any idea where can I purchase bronze brush?
Thx,
Felleni
-
Hi,
I usualy use Bruss brush to get nice Goldish color on the final product. I wounder if it possible to do the same with Copper brush and to get Copper like cover. I coulded find Copper brush and the only one avalible are Bruss. Any idea where to get them and what is the effect of using Copper brush on hot Iron?
Thx...
-
Hi all, Actually Konts reminded me the name of the material (Corten) which I was looking for. Thank you very much for the help.
-
Hi,
I hope someone can help me with the name of the material which has Reddish/Orange color and can be used for forging like standard iron alloy. It is quite common material used for gates, roofs etc and If I'm not mistaken it is iron that contains some amount of copper.
Thank you,
Fellini
-
Thank you folks for the help. The "Plans for The In Line Treadle Hammer (C. Spencer)"
is defently a good starting point. I'll post the picture of the final product of the Treadle hummer (not the power hammer...) when it will be ready.
Cheers,
Fellini
-
-
Hi folks,
I would like to build power hammer which is similar to the one in the picture attached.
Any drawing/design for a similar hummer will be appreciated.
Regards,
Fellini
-
Thank you folks for the beneficial inputs. It seams that I will build my forge with steel and focus on improving the isolation rather then deal with the stainless.
Fellini
-
Hello,
I'm considering building new gas forge using stainless steel material instead of iron (as the outside frame of the forge). The motivation is better energy efficiency since the stainless steel has better emissivity coefficient (lower than iron) as well as lower thermal conductivity(than iron) so the heat loss to the environment should be lower. In addition the stainless steel is more durable from oxidation/rus point of view.
I would appreciate any advice on this issue.
Best regards,
Fellini
-
Thank you Journeyman...
-
hi,
I trying to make old style bell using 3" metal pipe using the anvil horn, however I'm getting trouble to have it nice and smooth at the narrow side. I would appreciate any help how to make nice and smooth bell.
cheers,
Fellini
-
Thank you Jeremy for the response. This is the first time I'm working with Damascus still. It is 2x2 inches by 4 mm. I'm planning to make a knife. I will use your good suggestions as a starting point.
Thanks a lot,
Fellini -
Hi,
I got from a freind some small pieces (2'x2'x4mm) of Damascus steel. I would appreciate to get information what is the treatment required prior to forging and post forging.
Thanks a lot,
Cheers,
Fellini -
Yep,it works. so easy...thank you folks. Fellini
-
Thank you HWooldridge for the fast respond. Note that the holes are turned 90 deg in each bar so I wounder how they assembled the 4 pieces. Fellini
-
-
Hi,
I visited Italy few weeks ago and I saw this intersting window bar (see attachment). Any idea what is the process step by step for making it. I would appreciate your help. Regards, Fellini. -
Thank you folks for the very intersting feedback and helpfull tips. Apprerciated.
Rob -
Hi,
I know that Titanium it is very hard material. I have some bars of Titanium and I wonder if it is a good idea to make from it chisels. Is it posible to forge Titanium and is ther advaced to use this material for chisels? I would appreciate your advice on this issue.
Regards,
Rob -
Hi,
I have a piece of 3 feet long and 6" diameter of an hydraulic rock breaker hammer. I would like to use it as an anvil. I have two questions:
1. Is it a good material for an anvil?
2. How can I cut the 6" steel?
Regards,
Fellini -
I would like to learn how to make hourse or other animal head. Any help will be appreciated.
Fellini
Copper brush
in Finishes for Metal
Posted
Thank you Bigfoot... yep it is not so easy to find international shiping outside the usa...but found somthing in the UK...