Kreuzmant

Meh, I jumped the gun previously and ordered the itc 100. The firebrick I ordered is from xxxxxxxxx so it’s a high temperature refractory fire brick. After you’re recommendation I’m getting in touch with waynecoe seeing about ordering plistix and that kastolite as I can’t find anything smaller than a 55# bag online which is much more than I need. Thanks for the quick reply and clearing up my question on the kaowool layers

Guys looking for a little help here and haven't been able to find a direct answer. I'm building a gas forge with a propane tank shell with two 1" layers of kaowool. My questions come to the kaowool. My order is going to be the following: kaowooI, rigidizer, kastolite 30, itc 100, and some firebrick on the bottom. My question is as I'm doing two 1" layers, do I need to apply all three solutions rigidizer, kastolite 30, and itc 100 to both layers of kaowool. Or should I just use Rigidizer on the first layer and the other solutions only on the second layer. Secondly should I cure the rigidizer between each layer, or put both layers in and cure both together? I apologize if this has been asked before, but after going through forum after forum I have been unable to find a direct answer. Any tips on type of rigidizer are also appreciated.