Luis Vernabe

Thanks for all the tips, Guys.

Hopefully I am on the right place. I just was grinding my blade and notice that the spine warped a bit and was wondering if I can still put the blade back in the forge to fix some issues.

Hi, 

Hopefully I am in the right place for help. I seemed to not be able to produce enough heat off of my forge. I not sure if the psi is to low or my chokes are not set correctly. Here is a video to show the issue.

broken  video removed

Hi, I am new and was wondering what type of oil would best for queching a blade. Any help will be appreciated.

Hi, I just started forging mostly knifes, what is the best oil to quench? Any help will be greatly appreciated.

It turns out that the regulator was bad, I bought a new one at my local welding shop and was able to start my forge. Thank you all for helping a noob.

Hi I just bought a DFPROF2 + 1D"2, and it came with a regulator that's not made for the U.S.. I was wondering if anyone owns a Devil Forge in the USA and has bought a different regulator and so which one? I added a picture of the one that was shipped.

Thomas,

Great analagy, I just thought I ask. I will contact a few welding shops to see what they can do.

If my regulator has malfunction, where would I be able to purchase one?

I am asking about bypassing the regulator and put full pressure plus volume into the pipe.

If I wanted to by pass the regulator what would be the safest way to accomplish this?

I will consult my with local propane dealer.

Also, should this piece inside of the regulator be there?

How long should I wait after turning the tank valve before the gauge can read pressure.

John, I was able to successfully attach the propane tank to my gas grill and it worked. 

Thomas, I will try this when I get home today.

wpearson - I will tighten the nut into the propane tank when I get home.

Hi I just bought a DFPROF2 + 1D"2, I went through the set up and connected my hose and burners as instructed on the setup guide. My main issue is that when I turn the gas on from the propane the regulator does move at all, I tried twisted the valve left and right all the way and got not gas to go through it. I made sure that the hose and burners we're cleared from any debris and that were not glogges. I am attaching a couple of pics and a video if allowed to. Please any help will be greatly appreciated.