Vitorino

Mr. McPherson, thank you for the reference, I will look it up. And thanks Thomas for the suggestion. Everyone is extremely helpful around here, thank you for that.

Thanks everyone, you've been super helpfull. I'll finish up the restauration and put some pictures here for you guys to see. Also, since we're on the subject, I got this big tree stump I'm thinking of using as a base. The thing is, it's got 3 "branches" on the top end, I'm thinking of staking the anvil on the middle one but not sure what to do with the other two, you have any recommendations? What would be handy to have next to the anvil? Maybe drilling some very big holes on the larger branch, to the left, to hold all the hammers I don't yet have? Here's a picture of the stump Here's a better picture of the inscription, it's pretty fadded. And the hole under the anvil, which does not go through the anvil but is simetrical to the 'rivet hole' on top

Hold up. My stake anvil can be stuck on a bigger anvil?!? That's an excuse to get a bigger anvil if I ever seen one

Without putting on a scale, I'm guessing 4, maybe 5 kg. There is a letter 'S' on the side of it and I believe it had more marking that fadded away. The strange part of it is the hole on the bottom, opposite the 'rivet hole' as sugested by JHCC, in the comment below. What could that be? Any idea on the bottom hole, opposite the 'rivet hole'? Perhaps the hole was to hold half of some kind of plyers? Does this even happen?

Hi everyone! I found an old and small anvil in my grampa's garage and decided to bring it back to life, so to speak. After I cleaned all the rust, I realized my pritchel hole does not actually go through the anvil, although there is a matching hole on the other side. I'm pretty sure the hole isn't clogged, I have cleaned it to bear metal and actually pour some wd40 in the hole to see if it would seep through the hole, out the other side but nothing. Can someone enlighten me? What is the purpose of this "dimple"? I'll put some pictures up. Thanks in advance.