Jump to content
I Forge Iron

Tempered Warrior

Members
 View Profile  See their activity

  • Posts

    32

  • Joined

  • Last visited

 Content Type 

Everything posted by Tempered Warrior

  1. Tempered Warrior
    I ment didn't know not don't know
  2. Tempered Warrior
    I know I have a lone way to go. At the time I bought the steel I don't know where to get good carbon steel so I went to home depot and picked up some cheap constructional steel to start. As for the heat treat I heated them up to a bright orange and quenched into water
  3. Tempered Warrior
    Here are my first 2 knives. First one is a hunter 2nd is a krambit (as you can probably tell p.s. I tried sharpening but the just wouldn't
  4. Tempered Warrior
    Does any one know of a steel mill near philidelphia that sells round and square stock or a blacksmith supply web site. P.s. sorry I wasn't sure what section to put this post in
  5. Tempered Warrior
    Yeah I'm pretty sure just grabbing them is illegal.
  6. Tempered Warrior
    So I want to buy some rr spike on ebay to make knives but i don' t know if they're legally obtained and how would I tell if they r. Thanks for any answer you guys can give I know it's probably hard to answer
  7. Tempered Warrior
    It's hot rolled. Other than that I don't know
  8. Tempered Warrior
    Is 1011 steel blade worthy. If not what is, and what's the difference between 1011 and 1012. I look for about an hour but couldn't find anything. Thx
  9. Tempered Warrior
    Yes I light fires all the time. I just want to know if you think those bellows and blower will get it hot enough
  10. Tempered Warrior
    Thanks
  11. Tempered Warrior
    Well you didn't have to be mean about it. I only ask when i cant find the answer "IN THE FORUMS". I try to find an appropriate location but they just don't fit. And with the moderators they thought my "COAL" forge was a "GAS" forge. So back off!!!!!!!! You posted it to this thread and to reference material so dont blame us. http://www.iforgeiron.com/topic/43417-building-a-gas-forge-am-i-on-the-right-track/
  12. Tempered Warrior
    How hot do I need to get steel for knife making. And how hard is it to get. To that heat with a small blower and 2 small bellows
  13. Tempered Warrior
    So Korean sientists have made a new steel that's "as cheap as dirt" but at least as strong as titanium. What r your thoughts on it for blade making. I think that it would be pretty good.
  14. Tempered Warrior
    Thx
  15. Tempered Warrior
    my friend wants to make a bronze sword and I was wondering how good it will be. how would it compare to steel. on a scale a 1 to 10 with 10 being how good steel is where is bronze
  16. Tempered Warrior
    So instead of it being a side blower I drilled a hole through the bottom and got bellows
  17. Tempered Warrior
    I know I'm not very knowledgeable about this but I think it will work. I got this aluminum pipe red hot with out a blower
  18. Tempered Warrior
    I meant soda fountain. The coils are stainless steel, and have a slight hole for water. So I can use it for air transport. And it is deffinenty a blower
  19. Tempered Warrior
    Its a charcoal forge. The coils are from a sofa machine so they're ideal to get the air from the blower to the embers.
  20. Tempered Warrior
    Here's my forge. Just need to attach a pipe to the blower Mod: Since you have not already noticed, we have an entire section devoted to gas (?) forges, I will relocate this there for you. If you read the other posts there, you may find out why this is not going to work too well
  21. Tempered Warrior
    I have some fire brick for the wagon
  22. Tempered Warrior
    yeah I drilled a hole to general fit then hammered it in and gorilla glued it in
  23. Tempered Warrior
    Coal or charcoal. And I was talking to my friend today. His dad has an anvil he doesn't use. What, Luck
  24. Tempered Warrior
    I just built this "anvil" today. And do u think I can turn this wagon into a forge its pretty solid
  25. Tempered Warrior
    An you use any acid for ectching like viniger or do u need a special acid. Thx
×
×
  • Create New...