-
Posts
964 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by J W Bennett
-
-
Had some "me" time at the forge the last couple of days and since we needed some more tongs for the 4H program this coming year I made 2 more sets of poztongs consisting of 1/4",5/16",3/8" and 1/2" poztongs.
I followed the steps in the AFC best of the bits which is basicly the same as on the AFC web site and put the fullers on the side it says to and used a torch to isolate the heat. I have more trouble splitting the bits than I do anything else but thats just me. I started with 16" of 1/4"x1" so my reins would be a bit longer because we use propane forges for the majority of the classes. I have 2 more sets to make. It takes me about 30 min a pair more or less(usually more even with a power hammer for the reins).
Here are some pictures of the finished sets. I still need to stamp 4 pair with the size and my initials. These are my favorite tongs for holding small round and square stock.
John -
Propane and coal in that order
JOHN -
I have a rack full of hammers and then some. All shapes and sizes but I am down to about three I use consistently. I have a haberman that I really like and use 80% of the time. I have a rounding hammer I use probably 10% and a swedish hammer that I use to move metal and I use it about 5%. The rest I use various sizes and styles for oddball things. I also have various sizes of ball piens I use for punch and chisel work.
John -
Jason,
I recently bought a complete Vulcan fire pot with ash dump and clinker breaker from centaur forge. I am happy with the quality and the service was good. Shipping and all it was right at $200.00. It bolted right on to the buffalo forge I bought it for.
In the past I have also made my own forge and firepot out of plate and sch 40 pipe. I still use that forge and it has held up well.
I'm from north of Terre Haute, If I can help you in any way let me know.
John -
Greast Job Richard,
John -
Sounds like an accident waiting for an injury to join it to me:o
-
Glad you had a good start, I enjoy the demo's and the teaching far more than I do the selling. The last show I did I hired a friend to sell and take care of customers while I did demo's and talked to the onlookers. hope you have many more happy times.
John -
Ted,
I like your view on things.
Glenn,
used to heve a neighbor who jacked the rearend of his car up and blocked it up just a little off the ground and then put it in gear at an idle and chucked the walnuts under the turning wheel. It worked and the car never took off on it's own. If I did that the car would end up in the side of the neighbors garage:)
John -
CurlyGeorge,
I gave them to the lady, they are for one of the tables at the Purdue University foundation dinner and 4H is the theme this year. she is the local extension service child education agent. She wanted to promote the blacksmithing program that we have here and asked me to make them since I am one of the instructors for the local program. She tried to pay me but I donated them.
I'm a fair blacksmith but I suck as a business man,
John -
-
Picked this up this morning it measures 15-1/2" x 15-1/2" x 4" and weighs 165# not including the stand. It has seen some use but then again so have I. I drove 4 hours each way to get it. I probably paid to much for it but you don't see them this size very often.
The fella had quite a bit of blacksmithing equipment and he knows what it is worth. I'm glad I didn't take alot of extra cash with me or I'd be broke.
John -
Divermike,
My first one broke in half and the third one burnt up in the fire,that is how we learn our best lessons. Yours is good for a first. Glad your wife liked it.
eyrian,
Bill Epps did a demo on a russian rose over at anvilfire, I will try to get a blueprint worked up on the rose/napkin ring with good pictures.
John -
Sidney Brink,
Turns out to be 1" to 1-1/4" diameter
Jimbob,
It is a russian rose.
Divermike,
By all means and please share the results.
Once again Thanks for the feedback,
John -
Thanks for the feed back everyone,
eyrian,
They are made from cold rolled 5/16 mild steel round stock, The finish is applied with a brass brush while at a black heat. once cool a coat of clear enamel was applied.
John -
-
-
I'm glad to read that there are many folks that feel the things I feel when I sit in my shop.
Thank you for your kind words,
John -
Picked this anvil? up this afternoon as well as 5 pairs of tongs. The side has RAOLA stamped in it and the junk shop I found it at said it was made by Indianapolis Harware in 1898 (he has it scralled on the side in white paint). Not sure If it broke, If it did it was a pretty clean straight break. If it was saw cut I can't see the saw marks. It has two holes drilled all the way through the body side to side that look like they are for mounting and if you look real close you can see the wear marks where it was mounted that way at one time.
The stand it is welded to woobles and the anvil is cocked and will have to be changed before it is usable. The anvil from heel edge to horn tip is 26" long and the table is 4-1/2" wide and 16" long. It has a1-1/4" Hardie hole and a 3/8" pritchle hole.
Anyone ever seen one like this before or did it break and several hands have came up with different fixes over the years?
John -
Thomas,
Yes it is a colombian vise. At 5-1/2" it is the largest I have. I will take the 5" I have on my shop work bench off and make another "portable" base for it and mount this one on my shop bench.
John -
I got this post vise the other day it is 5-1/2" across the jaws. It was froze up and would not turn at all. Soaked it in diesel fuel still would not budge. Finally lost my patience and took a rosebud to it. Freed it up wire brushed the screw and box greased it up and made a new spring for it. works like new. The jaws line up straight and don't have a nick on them.
John -
Here are some pictures of the blower mount and the blower. The mount on the forge had 2 depressions in the casting were the bolt holes needed to be. I drilled and tapped the mounts for 3/8" bolts. I will probably bend the pipe arm in two places to raise the blower up about 6". It is a little low for me. Other than that it seems to be a good stable setup.
John -
-
Thats a good looking rig. I believe Trying it has one similar that he uses too. I have several small machinest vises laying around. Another item to add to the to do list.
-
Curly George,
Stan's has the original blower and I'm sure he'll remind me of that.LOL
Mike,
This forge has the holes and bolts for the cast arm and blower but they are not there. However it also has a mount underneath for a piece of 1" pipe to slide into and I have a blower with the same style mount so that should be a quick set up.
I am headed out to the shop now. I will take some pix of the mount and hopefully I will have pix of the blower mounted by lunch time.
John
101 RR spike uses.
in Blacksmithing, General Discussion
Posted
The local abana chapter has a fella that set out to see what all he could make out of a spike. He made grill samplers, cheese cutters, trolls, door knockers, hinges, swans...on and on. I haven't been to a meeting in over a year but he was up to like 50 something items from spikes then.
John