Klammer
-
Posts
48 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by Klammer
-
-
-
Just got it home. Confirmed fisher with the eagle on the side. Very good condition. Has to be at least 175lb but have not weighed it yet. total cost: $250 + he threw in about 30 used farrier rasps to hammer on.
will clean it up, weigh it and take some pics. -
thank you! greatly appreciated.
-
only info was that it does have a mark on the side thats hard to make out because of pitting / paint - circular in shape and that she does not ring loud though the face is hard. will be taking a peak tomorrow AM. cross fingers.
-
no price - only "make an offer" - no answer at contact # yet.
-
-
thanks! order in.
-
Was going to order from here along with some of their handles to ensure a match:
http://www.hawkinsknifemakingsupplies.com/7.shtml
Other option was from blacksmith depot:
https://www.blacksmithsdepot.com/page.php?theLocation=/Resources/Product/Forging_Tools_misc/Tomahawk_Drift.xml/
Can anyone who has used either or both comment?
Cheers,
Kris -
Got any close up pics of the brand name or any markings on it anywhere?
Only this pic which is from the add sorry. When I called he said it had a few letters on the side starting with "PC" - I would drive over and take a look but its a loooong way to drive. All he would say is "I bought it new from a farrier supply store, it was made in Canada" -
For sale locally - 112# - seller says it was made in Canada? Any help would be awesome.
-
When I first started knife making I used one of these and some fire bricks to make a simple forge for heat treating. Create a box with fire bricks with an opening in the side for the burner and let it rip. Would get a piece of 1084 up to quench temp in ~2min. I did not experience over oxidation etc. Actually worked fairly well for the cost.
-
The ones that I have seen for reasonable prices are gone VERY fast - I am talking hours...I am fast - but not that fast There must be a few dedicated folks on the prowl.
I will keep looking and trying and hopefully get lucky one day. -
Thank you for all the advice folks. I am located in just outside Vancouver, BC, Canada and anvils have been fairly scarce. The seller actually had 4 100# Kohlswa's for sale - he collects them it seems. He is a full time farrier. By the time I got to him the best 2 had been sold and the remaining 2 are fairly banged up with very beat up edges. I think I may wait for the NWBA conference in a few months and see what is available while I am there in the 200# range. After listening to your advice and thinking it through I do not think 100# would do me in the long run, and might as well save up my pennies and go in for a long term solution. I also agree that given what I pan on using it for, I would be better served with a different pattern than the London.
Thank you all for your good advice and quick response!
Cheers,
Kris -
Hello - First post here - looking for advice on an anvil. I have found a 100#. Kohlswa for $450 in fairly good condition. I am looking for an anvil to do general blacksmithing / bladesmithing / tool making. Is this a decent price? With shipping it would cost me ~$520. Would my money be better spent somewhere else? I had been saving for a 240# Rhino or similar larger / newer anvil. Have been using a 60# "trenton" anvil Ipicked up dirt cheap locally. Cheers!
Klammer
Fisher?
in Anvils, Swage Blocks, and Mandrels
Posted
Thank you Njanvilman - I greatly appreciate the detail. It felt quite a bit heavier than the stated 175. This is a huge upgrade over my beat up 170lb trenton farrier anvil. If I am ever in NJ I will ensure to stop by :)