Jump to content
I Forge Iron

Joseff

Members
  • Posts

    44
  • Joined

  • Last visited

Posts posted by Joseff

  1. Bandana on the head helps, sometimes a wet one around the neck does too. Used to be able to get cloth tubes full of hydrocellulose to soak and wear around the neck, they worked real good, but I never found wet stuff on my neck to be comfortable. A good product now is Under Armor, like sports pros wear. Just remember, its nylon, so it'll burn. I kept a big insulated mug handy with ice tea or ice water, drinking periodically while I worked. and such things as pickles are great for afterwards, when you really need the salt. And as far as that goes, if you've never had a nice cold slice of cantaloupe right after a hot session at the forge, you just don't know what you've missed. Mainly, though, learn to recognise the signs of overheating, and just quit.
    Joseff

  2. Aluminum can be cold forged easily, there is usually no need to heat it. I am of course talking about plate aluminum. It will get brittle when over worked, but with a bit of care, you can do a lot with it.
    Joseff

  3. I wouldn't think the concrete itself would be a problem, if cast iron can stand up to the heat, wouldn't concrete? Just make sure not to mix river gravel in that concrete, because I know for a fact that river gravel will explode at those temperatures. Yes, the idea of concrete is intriguing, I hope some of the more knowledgable members chime in on this.
    Joseff

  4. Hoary, I made my portable out of fire brick and plain old red clay out of the back yard. I used 1/4" diamond plate with drilled holes for a grate, and connected it with 2 3/8" bolts to a 2" galvinized flange. Then I made the air passage with 2" pipe nipples and a T. Worked pretty good in the scale I was using, and the cost was negligible.
    Joseff

×
×
  • Create New...