Quebecblacksmith

Hi TravisF! On this forum the only guy i know who had a Murray power hammer is  "Dillon Sculpture".

Send him a message.

this hammer seems to be in great shape but for a price to bet, i don't know.

good luck!

Check on this web page. http://www.newenglandblacksmiths.org/power_hammer_info.htm

This page give me a lot of information for the building of my power hammer.

Thierry

Very cool sculpture! Nice work!

I'm a professional welder. I have learn the techniques to weld cast iron with smaw and oaw.

I'm agree with ciladog but you have to pre-heat and keep the welding zone hot during all the process (beetween each pass) and tempered down very slowly with

some  refractory material like. 50 celsius degrees on 1 hours to optimized the weld link.

If your not sure to do it, ask a professional welder, but don't expect him about some guarantees about the solidity of the work.

Because the cast iron is not destinated to be welded, it's only a repair and it's never done a good fusion beetween the rod material (smaw= ni-rod).

In time it will be crack again near to the link zone. Yes you don't have lot to lose in trying.

You have a beautiful machine. I don't have a manufactured mechanical power hammer, but i built one! This document help me a lot for the shape and sizes of pieces than i have to do.

http://www.newenglandblacksmiths.org/power_hammer_info.htm

Nice work! It's seem to have good running. How many pounds is the ram ? It's like a old style Beaudry  hammer, Did you inspired

about that Hammer style?

I just finished to built one 100 pounds mechanical power hammer. It's a good feeling that 's provide to see all your work

result.  

Congratulations and good work!

Yes! for sure i must add one, thank's for advice.

Action! Photos of the power hammer building! Soon in april he will be installed in my shop correctly.

002.MOV

Better lightening to show how this shop made power hammer work and he forged a 1 inch by 2inch¼ square hot roll steel bar.

He do it well and hard!

But it will be better bolt on the floor.

004.MOV

005.MOV

Thank's guys!

I have worked a lot to build this one. I want to begin trying for real,

it's my first power hammer!

Maybe it's not last construction, for sure!

Here the connection system of the ram with this arms and ½ diameter coil spring. You see the rolls at

the end of arms made with recycled steel caster than i can lubricate with grease nipples. Anvil is made

by a 10 inch steel shaft, you can see the huge key hole, his weight: 518 pounds. 

The hammer Just wait to be installed correctly to be effective.

Hammer head with main shaft, key hole on it. The crank disc and the flywheel.

Ram guide is this flat bars of steel machined with v groove and welded on each side of flanges h-beam. They are 1 inch ¼ thick by 19

inchs long.

I have drilled two hole in each plate aligned with the groove center to install grease valves.

Two 1 inch steel square bars welded on each side of the ram and it's slide well.

Coil spring, rolls, dies with taper key and global view of the hammer.

005.MOV

marteau ressort2.MOV

I used the coil spring with two externals rollers at the end of the arm like on the U-100 utility hammer.

some pics of the system coming soon!

Thank's

Yes inspired by Beaudry champion. I pick the rolling system of ram and spring arm on the model U-100 Barbour stockwell co..

For sure next pics will be better.

Thanks!

I'm proud to present my mechanical power hammer. Inspired by Champion hammer. He need some adjustements and a fondation, but for the first test, i'm satisfied.

forgive me for my written english, is not so well. Is not my first language.

Enjoy this pics!

To see more of building go to youtube "building a 100lbs power hammer first test" or channel "Thierry Bélanger"

008.MOV

006.MOV

Incredibly amazing! For sure i'ts a person who was planified to stole this hammer.

It's the first time i see a champion in action. This mechanichal power hammer seem to be efficient. Bravo for your rebuilding job you do it really well.

The lower die in invisible!