IronPuppet Posted March 13, 2009 Share Posted March 13, 2009 I made my blower from an old Electrolux vacuum my MIL was throwing out. I hooked a 30 foot hose to the blow end of the vacuum and have the thing as far away from me as possible to keep the noise down. I built my forge out of an old truck rim. My fire pot is much larger than normal because I burn wood because coal is hard to get here and the neighbours never complain about me burning wood. I control the air flow with a big old tap I found in a junk pile. Works great. I can control the air flow with the twist of my wrist, from a whisper to an all out blast. Me tap. Installed just below me work table on the side of me forge. The vacuum hose just stick in the end of the iron pipe and fits there like a vacuum hose fits an accessory. Works real good for me. Christopher Quote Link to comment Share on other sites More sharing options...
Rob Browne Posted March 13, 2009 Share Posted March 13, 2009 Great idea and setup there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.