Spots Posted December 10, 2012 Share Posted December 10, 2012 My normal knives are 9" or larger so I decided a couple of smaller blades where in order. Medium belt knife, 5.5 blade, wrapped handle, hand sanded to 400 grit Small edc blade. 3.75" blade, 3.5 handle, wrapped handle, hand sandes to 400 Quote Link to comment Share on other sites More sharing options...
Ironman50 Posted December 10, 2012 Share Posted December 10, 2012 You are a knife connoisseur. Expertly done. _______________________________________ www.sawblade.com Quote Link to comment Share on other sites More sharing options...
Spots Posted December 10, 2012 Author Share Posted December 10, 2012 You are a knife connoisseur. Expertly done. _______________________________________ www.sawblade.com Thank you very much. I'm just a rougb steel beater trying to make something useful, but the complements are always enjoyed, and give me a lil confidence boost to make another, and always trying to learn and better myself and my projects. Quote Link to comment Share on other sites More sharing options...
Robert Yates Posted December 11, 2012 Share Posted December 11, 2012 Well done slow down and take your time on the finish of the blade . they look good however a bit more time on finish would make it much better . we need to get together so i can show you a bit of finesse (the fine tuning of a blade finish) . Best regards Sam Quote Link to comment Share on other sites More sharing options...
bosox Posted December 12, 2012 Share Posted December 12, 2012 You'll get A+ from me. Good job! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.