Sorry for all the pictures everyone.
I finally figured out how to load pictures into my gallery page, and since I'm home for the holidays, that's what I did this afternoon.
Sorry again.
Sam

Care to share Sam? I looked for a simple way to just add a gallery picture and came up short...

Ward

Sam, no need to appologize. Just share. How did you do it??? :blink:

I loved it. Its a bit like the videos that are to be deleted in the other post. Just how simple can a setup be compared to what we normally have.

The anvil setup is especially good. How about some info on it?

Sam good looking setup keep up the style

Sam, no need to appologize. Just share. How the H--- did you do it???

Thanks for all the compliments everyone.

Ward and George;
Here's how I think I did it ...

1. Click on the Gallery tab in the blue bar at the top of the IFI main page
2. On the Gallery page, click on Member Galleries in the Category column
3. On the Member Galleries page, click on the blue New Image button (middle of three blue buttons, top right hand quadrant)
4. This will take you to the Submit Image page. There is a window for the image caption, there is a description window, scroll down and you will find the Browse button where you can find and upload your image from your computer files, and then below that is the blue Submit Image button.
-browse and choose your image, give it a caption and / or description, click submit and it will automatically file your image in your gallery page which is also accessible (and viewable) from the main gallery page. (at least it did for me)
-it seems you can only upload images one at a time, so if you have multiple images to upload (like I did today), you have to start from the beginning for each image.
-you can view your personal gallery page from your profile page - look for the Gallery button in the menu bar above the "Recent Status Update" window

It took me a while to figure it out ... I hope it works for you.

Sam

I loved it. Its a bit like the videos that are to be deleted in the other post. Just how simple can a setup be compared to what we normally have.

The anvil setup is especially good. How about some info on it?

Thanks Rob.

What would you like to know?

Sam

Thanks Sam. I think that even I can follow those instructions. I'll give it a try shortly. :D

Thanks Rob.

What would you like to know?

Sam

The block looks about 4" square, is it set into the stump? Is that a cutting plate off to the side? The bick I can work out :)

The block looks about 4" square, is it set into the stump? Is that a cutting plate off to the side? The bick I can work out

The block is 5"x5"x5" mild steel with a 1"x1"x3" square post welded to the bottom.
The post is sunk into the stump and a shallow recess for the block is also carved out.

Yes, that's a mild steel cutting plate.

Almost a big hardy tool

Should be put up as a model for all those newbies who just NEED a proper anvil.

Thanx

Thanks Sam. I think that even I can follow those instructions. I'll give it a try shortly.

YAY CurleyGeorge.

-looks like it worked - good looking pictures.
Did you make that candle holder or was it a picture of the one saw and intend to re-create?
Sam

This was the one that I took the pics of. I did locate most all the material that i'll need to try to recreate it. I'll post more pics then. Thanks for the help Sam. :D

Thanks Sam. Silly me, I was trying to add pictures after going to my gallery page. Couldn't be easier. Thanks again!

Ward

Thanks Sam. I stumbled on it once, but couldn't find it. Appreciate the help.