LilBajan

I'm really not sure if this is the correct section to ask questions but I will give it a shot. My burner is pulsing. I have tried 8"-2" shafts to get the flame to torch, also with different size mig tips (.45-0.030) and I have got the most success with the 6" shaft and the .030 mig tip cut back about half way. My issue is that as soon as I introduce more fuel to the flame it blows out and the flame jumps to the top and burns there. I have tried playing with the air intake by capping off the ends and sliding the open/closed and this does not work either. I am very new to forging as this is the first gas forge. Any help would be greatly appreciated. Also I just joined this group so please send my in the right direction if I'm not posting correctly. 20210116_182130.mp4

I'm really not sure if this is the correct section to ask questions but I will give it a shot. My burner is pulsing. I have tried 8"-2" shafts to get the flame to torch, also with different size mig tips (.45-0.030) and I have got the most success with the 6" shaft and the .030 mig tip cut back about half way. My issue is that as soon as I introduce more fuel to the flame it blows out and the flame jumps to the top and burns there. I have tried playing with the air intake by capping off the ends and sliding the open/closed and this does not work either. I am very new to forging as this is the first gas forge. Any help would be greatly appreciated. Also I just joined this group so please send my in the right direction if I'm not posting correctly. 20210116_182130.mp4