Ecross

Update. I talked to the propane provider and their response was "high pressure isn't supposed to go into the building like that better off getting a 100# tank." So no go... the guy did say from the tank its regulated down to 10psi then at the building its down to .5 psi so yeah. Looks like I'm getting a 100# tank.

Absolutley. I haven't had a chance yet to call the propane company to see if it is even possible yet. My day job has kept my busy and in a different town than where I wanna set up the new shop. I hope to be able to call tomorrow. Will let you all know.

Definitely going to have to call the propane supplier.

The regulator I have is the one in the picture I'm not sure the exact model it came with the forge. The tank is a standard 500# tank outside the pole barn with lines into the barn.

Thanks frosty I will try that first

Thanks guys I think I may go to either a plumbing or welding supply place. In terms of maybe being more specific... the regulator itself has an acme nut for screwing into the propane tank directly. The problem is I'm trying to connect it to a 500 lb home tank (the place I'm trying to set up shop has an auxiliary tank by the pole barn that isn't being used for anything). The line in from the tank has a 1 1/2 inch pipe coming in from outside. I will get pics of the regulator in the morning. But I have attached the product image.

Ok guys I need to go from my devil forge regulator acme nut to a 1 1/2 inch pipe but I need to transition from thr acme nut to a standard size. Does anyone know what I need? I've tried my local hardware and researched and im not sure what I need. Or any ideas on a different regulator I can connect to the 1/4 hose that goes to the burners?