Caballo bueno
-
Posts
51 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by Caballo bueno
-
-
It's blast forge and if sometimes I use coal and other times coke
-
Do you have the air tube at a depth of 10 cm?
-
How much would it be in centimeters? It's for a blast forge
-
How do I determine the depth of a forge for coke and coal? I work with these two coals because the availability here sometimes there is coke other coal -
How are the bearings fitted in their bore?
-
-
I don't know how to make a bearing for the shaft where it goes through the casing
-
-
I will make the casings with two butane bottle bottoms, what I don't know is how many blades to put or the air outlet tube
-
Does anyone have experience making crank blowers with bicycle sprockets?
-
if I say it because of the slag that sticks and you take half a forge if the mortar is not good...
-
but the clay can get very hard and the slag when sticking will not take a good piece?
-
Is silica sand essential? What mix would you use your Charles?
-
With which biker could I wrap the nozzle so that it doesn't burn?
-
Okay. What if I mix it with lime? How do I protect the tube from burning without using a water tank behind it?
-
I understand... I mean, do I use ashes and the charcoal powder from the mixture? Does the clay that I mix with the sand have to be refractory? What about the cat litter?
-
Hello! I continue with my research on lateral blast forges and my question is if there is any clay or sand that repels the slag and does not stick to it.
Greetings
-
yes home
-
Which sands or clays repel slag? The silica sand sticks to it.
-
How do I determine the width of the side draft firebox and the depth?
-
-
what is a jabod?
-
They are not 4, they are 40 mm of the diameter of the tube through which the air comes out to the stove
-
I can put a pipe in the 40 mm shaft, but I don't know what measurements to give the crater to heat pieces like 4 mm thick bars, etc.
dDetermine depth
in Solid Fuels: Coal, Coke, Charcoal, Wood, etc
Posted
but I want it for a blast forge