Im a total newbie to forging so here is the first dumb question, I have ran the search multiple ways, but Im not getting answers, probably asking the wrong questions. I have been doing reading for a few days here and am wondering about using a beckett burner and diesel fuel on a forge. they have changeable jets and the fan is already in place and can be set up to hold a temperature . I have a hot water washer that has a 2.5 per hour diesel nozzle in it and it gets with the program. or is there something with the fuel that ruins the steel to much or something? I guess the oxygen level in the forge could not be adjusted very easily. I dont want to mess with waste oil because of the contamination hassles. but I always have a few hundred gallons of diesel around and propane is a bit of a pain. is there something Im totally missing? I saw there is a one of them on youtube but all it was was the build and not if it worked. Im wanting to build a forge big enough to put cable tool drilling bit in to do an old-time demonstration of bit dressing the hard way.