Alecsey p
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by Alecsey p
-
-
Здраствуйте, подскажите до какой температуры греть наковальню перед сваркой, и до какой температуры после сварки? Подскажите нужно после сварки закалить лицо наковальни?
Zdrastvujte, prompt to what temperature to heat an anvil before welding, and to what temperature after welding? Prompt you need to harden the face of the anvil after welding?
-
-
Спасибо, буду пробовать.
Thank you, I will try.
-
Добрый день коллеги, немогу на форуме найти ремонт наковальни. Может, кто ссылку подскажет.
Good afternoon colleagues, I can not find an anvil repair on the forum. Maybe someone will tell you the link.
-
По вопросу происхождения наковальни, на большинстве наковален северной германии круглый рог справа от площадки для осадки, на моей слева. Может у когото есть фото подобной с круглым рогом слева?
On the origin of the anvil, onthe majority of the anvils of northern Germany, the round horn to the right of the precipitation site, on my left. Maybe someone has a photo with a round horn on the left?
-
4 hours ago, Frosty said:
Существует как видео и письменные инструкции о методе «Гюнтера» ремонта наковальни.
There is both video and written instructions on the method of "Gunther" repair anvil.
У вас есть ссылка на видео, мне интересно знать про этот метод ремонта подробней.
You have a link to the video, I'm curious to know more about this repair method.
-
15 hours ago, Frosty said:
Является ли наковальня литой или кованым кованым железом?
Is the anvil cast or forged wrought iron?
Наковальня стальная точно, скорей всего литая, сварных швов не видно.
An anvil is steel precisely, most likely cast, welded seams it is not visible.
-
-
16 hours ago, ThomasPowers said:
Если он вздрагивает от удара легким молотком, он, скорее всего, потерял свое ожесточенное лицо
If he shivers with a light hammer, he most likely lost his fierce face
Есть методы ремонта уплотнить лицо? Может наварить пластину твердую?
Are there methods of repair to tighten the face? Can weld a hard plate?
-
Шариком не испытывал, от молоточка хорошо звенит. Но от легкого удара молоточком остается след.
Про круглое отверстие с боку не понял зачем оно? Может у вас есть фото, как применяют такое отверстие или нарисуйте пожалуйста схемку.
I did not feel the ball, it rang well from the malleus. But from a light hammer blow remains a trace. About the round hole from the side did not understand why it? Maybe you have a photo of how to use such a hole or draw a sketchbook.
-
Лицо прилично побито, порублено зубилом.
Как думаете лицо фрезеровалось?
Для чего большое круглое отверстие? Завоводское или просверленое старыми хозяевами?
Face decently beaten, chopped chisel. How do you think the face was milled? Why a large round hole? Zavodovskoe or drilled by the old masters?
-
Здраствуйте, форумчане помогите определить производителя наковальни. Хотябы в какой стране была изготовлена? Нет ни каких опзновательных клейм. Вес 550-600 фунтов
Help identify an anvil producer
Zdrastvujte, forum users help determine the manufacturer of the anvil. At least in what country was it made? There are not any stigmatization marks. Weight 550-600 pounds
Gunter anvil repair method
in Anvils, Swage Blocks, and Mandrels
Posted
Что это такое и как ими пользоваться? У вас есть фото или видео сваки лица наковальни?
What is it and how do I use it? Do you have a photo or video of an anvil face welding?
Можно наварить слой 13мм?