Forrest Betts

Thanks for the responses. I attached a picture showing the SS stamp next to the serial number. Had already done my homework and looked it up hence how I found out it was dated 1912. It's the real deal.

Did some light clean up on my 1912 solid steel Hay Budden anvil.

The picture is a before shot. Check out the video and tell me your thoughts.  Thanks everyone! 

Just a part two video of the homemade 2x72 belt grinder I made. A more in depth look and some extended use grinding an old file into a push dagger.

Please give it a watch and let me know you thoughts! I'll probably respond faster if you lave a comment on the video.

Click here to watch now!

If you haven't seen part one click here.

Thank you! I do plan to add step pulleys in the future.. Just haven't found a broken drill press to steal them out of yet. Hahaha..

I also plan to update the platen with the one sold from Oregon Blade Maker. Click here to see it.

But I was kinda trying to see how cheap I could build it first... The only part I HAD to buy was the drive wheel. Everything else was re-purposed junk essentially. Drive wheel was a little less than $50 So that's all I have into it so far. 

Made a homemade 2" x 72" belt grinder out of scrap and repurposed parts. Check it out and let me know your thoughts! https://youtu.be/BEi2ruFzGNw

A friend and I were just starting out and came up with this idea to build a forge on the cheap. Check it out and let us know what you think. 

https://youtu.be/_R-HiuUzTiM