ronip

Hello. I'm new to pounding iron and I Forge Iron, but electrician has been my occupation my forty+ years. After reading what has been written as to what you are trying to do, the information you have provided, the information from the Surplus web page, I'll put in my two cents worth. If I understand what has been written you have a 2 soleniod operated closed center hydraulic control operating with a power unit that runs off another seperate switch that has the unit run continuesly until it is switched off, but is not controlled by up/down buttons of the pendant that controls the hydraulic control. If this information is correct, then neither of the Surplus pendant controls 11-3244 or 11-3255(VHS61) is the correct one according to their information. Surplus pendant control 11-2201, again from their information, appears to be the switch you need and the print that ciladog furnished eariler is accurate and will give the control you desire. All this being said, most likely any one of the pendants would work if you could open it and rewire the switches internally but with the way the internal connections of of some manufacturers are made(today some switch jumpers are welded instead of wired) , that might not be a viable option.Hope this helps and do some visual of your bender.