Ratel10mm

I'm not sure if it's okay to post this, but I have no relationship with the seller or anything. And it's an interesting design of tongs.

Adjustable Tongs

No idea mate. As far as I know I don't know anyone who uses a hand cranked blower - even demo-ing at craft fairs there's generally a 1ph. supply.
I'll look into it. :)

Gday Ratel10mm, Welcome to Brisbane, Say Gday when you get here.

Thanks all.

Rusty, I'll give you a yell when we get there.
I've been there in summer before a few times. I'm told that February is worst - not tried that yet. The wife comes from Tweed Heads, so not sure if we'll end up in Brisvegas or Porpoise Spit yet.
What I do know is she wants to be close to the sea. Good with me, especially if Cudgen Creek is close enough for a morning dip.
I am, however, wishing we could have found the money to buy a property 5 years ago.

Hmm, I've been told of the possibility of an anvil or 2 at the 105kg range for aorund

Nice looking piece.

To the Aussies on the forum;

We're moving over later this year, expecting to clear customs at Brisbane around mid - August. At the moment we are probably going to have a groupage shipment as we do not have enough to fill a container. I have been told that a 20' container will cost around

They are scattered about my website. The link is in my sig.

Cheers Ron, I found it.
The knife looks like it'll work well. Hope I can do as well one day. :)

From that animantion I'd say that it's meant as a self-compensating jaw for gripping varying size stock between the 2 faces. The 'teeth' on either side of the swinging plate being there simply to keep the plate in line.

Just a guess of course. It's certainly an interesting tool whatever it is.

I've seen 2 things so far that I thought useful - one was a post vice adapted so that the fixing plate had a post welded underneath to fit the demo anvil's hardy hole - coupled with a tube welded on the anvil frame for th epost to fit through. The post vice just drops into place when needed.

The other thing was a set-up that Pete Oberon has in his shop (I beleive that he won't mind me mentioning this as he did say to take any photos & ideas we wanted to).
What he'd done was make a small table / bench with a vice mounted on it. The legs were steel angle iron, and welded to the bottom trusses was the wheel & frame from a wheel barrow. This enables him to wheel the (reasonably heavy) bench outside in good weather so that any angle grinding is done there. It's amazing the difference it makes in the noise level inside the workshop.
I was so impressed with the idea that I've been thinking of ways to adapt it for future use.

That looks pretty da*n good to me! Is the damascus your own (sorry, not sure if I'm reading you right - where's the embarrased smiley when you need it?) , & what mix please?

Could you post some pictures please Ron? I'd love to see what you've come up with. :)

We've not met as such, but it sounds like a tough time so I just wanted to say good luck with the job hunt Pam. :)

Great find, thanks! :)

Welcome to the forum Toad. I'll be over there myself later this year, and looking forward to it.

Interesting point ballpeen. Over here though we generally prefer to use old files as the steel is usually suitable for cutlery, which most modern files aren't.

One of my friends just digs a hole in the ground & lights a fire in it. You've guessed it, he earns a part of his living demonstrating iron-age forging - even has someone pumping bellows rather than a fan. It works remarkably well & would probably be the ultimate in portable forges. ;)

Refrigeration Technician (know more than a mechanic, less qualified than an engineer. ).
Studying blacksmithing as circumstances allow & hoping to build up a business in artistic blacksmithing & blades.

Ratel10mm, may I ask where you got it from? I've been looking for a reasonably priced cross-pein but I can't find one in this country.

Sorry Matt, I only just saw your post.

The place is Cold Hanworth Forge, run by a chap called Bob Oakes.

The cost iirc. was

I'm not a patent lawyer or even approaching that, but I would say that you run a huge risk of a court case if the patent holders decide that your design infringes their patent.

I'd try to get a patent for your design, as that aught to offer some protection. As in - if it were significantly the same as the competition's, then you owuld not have been granted a patent?

Definitely get professional advice. :)

My favourite is a 1kg cross pein, square head by Peddinhaus. Wood handle.

Glad to hear you've got it sorted mate. See you at Owen's in March.

Ferric Chloride is the common one over here. But someone did an experiment a while back on BB & found that coca-cola will etch. ;)

Thanks for the welcome guys.

Thomas, that sounds like a good idea. I'll post it up somewhere & see if there's any interest.

Larry, I live close to Henley-on-Thames, in Oxfordshire, U.K. We're moving to Oz because my wife is from the Gold Coast & wants to go home. Can't say I have a problem with living in Oz! ;)

Hi all.

Thought I should join after a number of smithing friends pointed the way. Looks like a good site to be a member of, & I hope to be able to contribute to it.
I already see some names I know from British Blades (my home on the 'net), & look forward to getting to know the rest of you.

I am just beginning to learn the art of blacksmithing, having decided that a change was due early in 2007. I'm learning part time at the moment, and have attended courses with Bob Oakes, Peat Oberon & Owen Bush.

We're moving to Asutralia later this year, & I hope to be able to set up a small forge & start out as a (hopefully paying) hobby & see where it goes. :)