Joe Davo

This looks great, i now know what I'm going to make next

Cheers Joe

These are awesome. They would go down really well with younger customers

Joe

This page has a fair bit of info on how to find a used anvil, might be helpful to you

Link removed at the request of Anvilfire.

Joe

It sounds as if your thinking in the right direction.
What your thinking of is what the majority of smiths in the ancient world would have used as you noted with the Vikings.
The modern style London pattern anvil has only been around recently in the scheme of things.
You only need to make sure you get hard steel as if it is to soft it can begin to dish.

In not that experienced so if I'm wrong hopefully someone with more Experiance can correct me.

Joe

I like the way you position your vises.
It's a clever usage of space

Joe

I can't give you an answer sorry, I'm very inexperienced so hopefully some else can.

Just wanted to thank you for sharing an awesome old video. It's great to see how it was do, and probably still done in a
Very similar manner.

Cheers

Might throw my name to the long list,

Joe Davidson, Goolwa, SA were the mighty murray meets the sea
Just starting as a hobby at the moment

These are awesome, great job
Very versatile

That's cleared it up, thanks.
it looks like am great idea, I think that I might use the idea for my next forge, aswell as a fire pot and more room and a better air source :)
Thanks again
Joe

That sounds interesting rockstar, still trying to get my head around it.
Is there any chance of a diagram, if not does, the water pipe enter the fire pot sideways or through the middle of the air inlet?

Thanks

Joe

That looks really great, thanks for sharing it

Thanks for all the great replys.
Yesterday I put together a small forge with no fire pot, and I think I will use it just to start learn the basics and save up for a fire pot.
Then I'll try making a better forge with a fire pot and a larger area to work in to.

To frosty, I live in South Australia. So a fair way away from most you :)

Yeah I like the look of the "55" simple but effective. I think I might go for something similar.

Thanks for the help

Joe

Okay, thanks for all the great advice.
I'm fairly remote were I am with the nearest blacksmith guild interstate. But I do know one smith that I will go and check out his set up
in depth.
I might try and build a few different types over coming years depending on what I can get my hands on to try and find a setup that works for me.

Thanks again for all the advice

Okay thanks, I'm hoping to make it bottom blast and hand powered. The overall size is going to be quiet small, probably half a metre to a metre square. Most likely charcoal or coal fuel. In the end it is very flexible, as still in the planing stages.

I will keep checking out different ideas, thanks for the help. Much appreciated.

Joe

Hey, I'm pretty new to the art of blacksmithing and have just hit a stumbling point.
Most of the forges that I have seen have a fire pot, but I was just wondering if it is a
necessary part of the forge. Can you get by with out one?

Thanks, and sorry if it has already been asked just couldn't find an answer. It's probably common knowledge.

Joe