Scy

Members
  • Content Count

    4
  • Joined

  • Last visited

Everything posted by Scy

  1. I had seen a guy with a gas forge doing that, but I'm not sure if it would be a good idea or not with a coal/coke forge due to disturbing the fire. I came across one video where the guy had a trough the size of the sword and he did move it some but he wasn't cycling a 36 inch pice of steel through 8 inches of fire ( http://www.youtube.com/watch?v=OvmGvAM93bg&feature=related ). I can see why you wouldn't just leave it though as you would possibly burn off the tip or worse. And HWooldridge, I like the idea of the sliding gate, possibly making something like the trough from the video with the gate at the bottom and a blower able to handle the whole thing. (I hope one chimes in too to hear their opinion on the matter.)
  2. About how much cfm do you suppose it would need then to HT a piece about 3-4 feet long, the main reason I ask is because I plan on ordering a "good" blower rather than getting the wrong thing and trying to make something work that isn't well suited to the situation. Hence reaching out to the community. :) I figure something that can handle that can do double duty for regular work with an air gate to help keep things under control.
  3. I'm looking at building a forge for a combination of general purpose work and for tempering long items such as swords. I've decided on using an electric blower for the air supply, and already know to use radial/centrifugal type blowers. I've done a bit of searching and have come across information stating to use a blower with a flow rate of about 150-400 cfm, and suitable for anywhere from 1.5 to 6 inches of static pressure. My first question is: Is this information accurate? To design the forge for general purpose work, would it be easiest to design a forge with long firepot with multiple tuyere "branches" going to separate grates in the bottom of the firepot, or perhaps make one long grate with an air gate just underneath that could slide out to adjust the amount and size of the air blast? Perhaps there are better ideas than this that I couldn't find? With the multiple branches, an air gate on each branch could control the size of the blast, but I'm afraid of uneven heating causing problems for hardening. The final problem is how much air flow will all this require. Going from what was stated before, for a typical forge an average of 250 cfm could be a basic reference point. With 4 tuyere "branches" or the equivalent thereof, the needed cfm would be more around 1000. Does this sound correct, and if there is any information I missed or anyone has a better idea please let me know!