Jason Koss

Thank you for posting this.

Good start.

I use Faststone image viewer for renaming and resizing. I tried briquettes also, I tell you it is better to use plain wood if you don't have access to charcoal or coal/coke.

http://www.faststone.org/FSResizerDownload.htm

Thanks for giving me research for the next few days. I did not realize the difference. I was thinking of a dimmer switch, similar to ones that are installed in homes to control lighting and fans. I am still uncertain if it is actually a rheostat or an autotransformer. I have always heard them called rheostats.

I love learning and AC is one of my weak areas, so thanks for pointing this out. I did find a formula for figuring out the pulley size and rpms.


Drive Pulley diameter / driven pulley diameter * input RPM = Output RPM

Could a simple rheostat fix the problem? Would it cause loss of performance, or a heat build up in the circuit?

Here is my first attempt at a spike knife. I put the twist in it with two adjustable wrenches, I really need to buy a vise. I finished it with an angle grinder and a Dremel.

I picked up a two foot section from our local steel scrap yard. Also found plenty of spikes, coil and leaf springs, a few old files and a large piece of 1/4 inch plate for about $35.

I did find some decent coal on the tracks not too long ago.