greetings,
thought i would make my 1st post a completion
topic & an introduction as well.
a lot of internet research led me to 3 choices for
gas powered burners. from 3 came the one i selected
and i couldn't be happier with Dave Hammer's build process.
his video was excellent & i actually was able to source all of those
crucial components at my local hydraulic design/supply
shop. just 20' away from me!
so here are some pics of the forge burner in operation . . . .
and here is a pic of my Forge candidate:
so i have some questions regarding the size of the forge -
1. i intend to use only 1 burner for now --- this tank is 2' in length so its way too big for a single burner . . . .
what would you guys recommend for a max working length for this type of single gas burner?
2. the girth is a little over 3' & since its an ex LP tank -- wall thickness is probably close to 1/4" --- would like
to use 2" of Kao-wool or similar with full dimensioned fire brick for the floor.
would like to hear comments about my choices for insulation & the brick .. . . .
its a great site & my hats off to the very cool, laid back atmosphere of the working k'base of members.
and would like to extend my thanks to D. Hammer for his efforts to produce a most excellent video of
this particular burner.