wampus
-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by wampus
-
-
I've also been known to be cranking the blower for a good 10 minutes, before noticing the dryer hose from the blower to the forge wasn't connected.
Are we related?
~~W -
In response to your coal shortage,I have the same problem here,I make charcoal. It doesn't burn as well as coal,but it gets the job done.
-
My neighbors both have commercial grass cutting buisinesses and as a result have lots of old blades that are just thrown out. Have any of you ever made anything out of old lawn mower blades?
~~WAMPUS -
I think that I might have some lighter plate, I will check.
-
Well Guys I have made progress and have invented my own forge system. Wahooo!
You guys are gonna love this I just know it.
I bought an old farm trailer (like the hay ride kind but without the sides and the wood floor) for $200. It has a steel frame with steel beam that run across the trailer with 16" between them. I also have a mother load of this 1.5" thick plate that is in 4'x8' sections. I am going to fasten those plates on the trailer to make a floor/deck/table top (can you see where this is going?) Then I am going to cut a hole in the deck and put my fire pot in it. I am then going to use the blower part of an old air handler to give me my air flow. (I am not sure how just yet)
But I think that this is a good idea. I complete forge mounted on a trailer that can be pulled around the farm by either the tractors or the mules. All I would have to do is hook her up to the electricity for the blower and away I go. Plus by standing only 3'8" tall the trailer is the perfect height for a work bench.
Pretty cool huh?
Let me know what you think. I will post pictures later.
~~WAMPUS -
I am 14 and am learning from a neighbor....he can forge things that boggle the mind......
~~W -
How many blacksmiths do we have here that haven't yet graduated from highschool? In other words,under age 18. Just curious.
~~Wampus -
Nice!
~~W -
Okay everybody here is our situation. I have aquired a brake drum and some other goodies. My question is can I get going in the right direction with this xxxx?
1. mid sized brake drum
2. 55 gallon barrel (i might have 2 of them I don't know for sure)
3. A whole heck of alot of cinderblocks and bricks
4. some angle iron ( really heavy)
5. 3/4" steel plates (about 4x8')
~~Wampus -
That is very nice!
~~Wampus -
Hi everybody! I am getting into smithing and found this site. It looked like a fairly friendly place so I joined. I hope to learn alot from you guys!
~~Wampus
Charcoal vs. corn
in Solid Fuels: Coal, Coke, Charcoal, Wood, etc
Posted
This is very interesting guys. I will try this corn burning soon. I wonder what would happen if I burn cob and all? We will see! I'll get some pics and stories when I do it.
Wampus