tormentchris17 Posted February 20, 2011 Share Posted February 20, 2011 i have a 25lbs power hammer, and am looking for someone that might have any 4140 they could sell me for making some dies. or point me to a place that could sell me some. i need a couple sets of dies actually.4 pieces of about 3x3x2 inches. if so please send me a message and we can work something out. thanks, chris Quote Link to comment Share on other sites More sharing options...
monstermetal Posted February 20, 2011 Share Posted February 20, 2011 i have a 25lbs power hammer, and am looking for someone that might have any 4140 they could sell me for making some dies. or point me to a place that could sell me some. i need a couple sets of dies actually.4 pieces of about 3x3x2 inches. if so please send me a message and we can work something out. thanks, chris I have 3" X 5" 4340 bar stock. $10/inch plus shipping (a foot is about 60lbs and will go in a flat rate box) Quote Link to comment Share on other sites More sharing options...
peacock Posted February 21, 2011 Share Posted February 21, 2011 3x5 is just right. The bottom die needs to be 5 inchs long the longer foot print gives more support in the bottom dove tail. Also that size will minimize machining cost. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.