February 2, 201115 yr A few weeks ago I got a Hay Budden in decent shape. The current issue is that the hardy hole - when viewed from above - is actually twisted as it goes through the heel. A hardy shank can go in from the top about 1/2 inch and from the bottom a bit more than an inch. Is there a reasonable way to square the hardy hole up or some other work around that will make it usable?
February 2, 201115 yr plop it down in front of the TV, get a file and pick two corners that are the most square and bring the other to meet them. sunday when the game is on would be a good time, as you can rewind if you miss something exciting it took me about an hour a corner to square up my kohlswa
February 2, 201115 yr plop it down in front of the TV, get a file and pick two corners that are the most square and bring the other to meet them. sunday when the game is on would be a good time, as you can rewind if you miss something exciting it took me about an hour a corner to square up my kohlswa what type of kohlswa is it?
February 2, 201115 yr what type of kohlswa is it? english pattern ruffly 78lb (not the 80's soft steel) and now have a 7/8" hardy hole instead of 3/4"
February 2, 201115 yr english pattern ruffly 78lb (not the 80's soft steel) and now have a 7/8" hardy hole instead of 3/4" oh ok iv been looking for a b-38 south german wide face
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.