Treywa

Frosty,

Is this the product you are suggesting?  I want to double check before placing the order.  Thanks for your time on this.

HWI Kast-O-Lite® 30 LI G 

[Commercial link removed.]

Also, I found a burner design a while back that I used in a small forge for knife making that tapped into a black iron pipe T using a MIG welding tip as the gas nozzle.  Thinking back I recall that it was called the Frosty T.  2+2 being 4 and all, I’m thinking that must be your design.   Very cool man, very cool.  I made a larger burner with that design for my furnace I’m itching to fire up once I get the refractory squared away.

Thanks,

Trey in Spokane

Thank you for the insight and information!  I appreciate it.

-Treywa

Hi.  New here and I know enough to be dangerous, which includes knowing that I don’t know much in the big scheme of things.  I’m building a gas furnace that will be lined with 2 inches of ceramic blanket density #8 that I am going to cast a 1 inch refractory over.  I’ve got some Girtech Firecast, but I’m a little shy of what I need, and want it to go a little farther.  I’ve got some ground fireclay, and I’d like to get some opinions on adding some ground  fireclay to the Firecast castable to get more refractory in the end.    I am concerned it might compromise the strength of the refractory, but also think that there is probably a reasonable mixing ratio that it would still work out.  Thoughts?

Thanks!

-Trey in Spokane