Caukman

1600

16. I saw the drilling and tapping idea. Is that a longterm solution? 

I cant find any anvils in that weight to gauge a price. Most that are are 200 to 300 go from 1200 to 2500.

How much do you think it might be worth as is?

well any advice? is it worthless

Its just in a small area. the rest of the face is has fantastic rebound. Including the heel and the horn. 

Hey new here and what not. 

I aquired the anvil yesterday and upon further inspection found that the plate was beginning to seprate from the base. Due to its size i was curious if itd still be okay to work on with the crack and Also if it is worth it to repair? It Starts near the front of the anvil and runs about 6 inches down the side. The crack doesnt even come close to the plate until the last inch or so. on the opposite side there is a corresponding crack 5 inches lower the the other one. The face is dead above the crack but fortunately enough theres plenty of room to work around it. I can post photos later when im home but if anyone can shed some light on this id be eternally grateful.