WhiteElder

On 12/12/2018 at 4:36 PM, Buzzkill said:

If it were mine I'd probably rotate it so that instead of one horizontal and one vertical leg there would be 2 vertical legs in roughly a V shape when viewed from above. 

I kinda like this idea. And with this I could have a few tabs with holes welded on the bottom then screwed down. 

I might drop up a couple ideas and post again. 

Thank you all for the great ideas.

First time posting so it this isn't the place to ask sorry.

I got this large angle plate and want to use it as an anvil. Plate is about 104lbs of mystery steel. Planning to put a 1" square hardie and 1" round hole. Towards the back and think to mount it do they would be thru holes exposed on the backside.

Wanting help on ideas on how to mount it.  Thinking something like the hand drawing. I had thought to cut some grooves in the edge and use some sort of tiedow / toe clamp. A buddy is suggesting I should put a couple more holes thru the faces and lag it down.

So I am open to suggestions on how to mount and or what holes I should put in it.