TheTacticalMop

Thanks for the quick reply! I will look at those immediately.

I'm new to this page and I'm new to blacksmithing. I have built a propane forge with kaowool and it will not get hot enough to heat the metal to a orange/red hot unless it is right on the flame from the burner I am using. I was wondering if I could cut off a part of this old turkey roaster and use it as another burner. I am using a bigger propane tank with a hose and a regulator to connect to the tiny burner that I have and the turkey roaster already has a hose and a regulator. Also the red line on the turkey roaster is about where I would cut it off.