-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by KWJ
-
-
Hey
I bought the tank at Home hardware 5 gal. portable air tank there are 2" of ceramic blanket and the floor is 1" thick
firebrick then I coated everything with two coats of ITC.-100 . The jet I'm using at this time is .043 drill bit #57 and I also a .046 jet
If you go to this link there are pictures of the complete build http://s283.photobucket.com/user/baja47/library/Building a Forge?sort=2&page=1
Before costing
-
I just finished building a 5 gal. air tank forge it has an interior area of 358 cubic inches with one 3/4" burner and had some time to run the forge and check out some temperatures.
It took 3.25 minutes at 2 psi ball valve 1/2 way open to reach 1550 F and the same 2psi ball valve all the way open 7 minutes 2000 F
This forge build far exceeded all my expectation -
Hi everyone I've been collecting Knives for a while and decided to start making my own knives at this point I'm putting together some tools and
equipment and also reading and talking to as many knife smiths as i can to gather as much information I can on tools ,equipment and there techniques.
My background and day job is Motorcycle Mechanic and Custom Bike Builder I have done a fare amount of welding and metal fabricating I'm very comfortable around hot metal and most tools big or small.
Number of burners
in Gas Forges
Posted · Edited by KWJ
3.5" high and4.5" wide