-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Articles
Gallery
Downloads
Events
Posts posted by R290
-
-
Coal is $35.20 here for 50lb sack. its imported from Kentucky
Long way from Texas
-
Thanks for the information. I hear ya on the cost of fuel. Good tip on painting the floor with ITC.
Is 8" to big? I can do 3 wraps and make it 6"
CBA? not sure what that is. I could guess at California Blacksmith assc. -
-
So without hesitation, I jumped in with both feet.
I bought a 3/4" burner from Rex at Hybrid burners.
I picked up a 3 20lbs propane tanks from the neighbor when he moved.
I cut the end out of one tank with a jig saw and a slot on the back to allow items to pass through.
Some of my other supplies arrived. Koawool, itc100, rididizer, the propane regulator and ball valve.
I burned the tank in my fire pit for about 15-20 minutes to get the old propane goo out.
I sanded the rust and old paint off, plus its been washed with soap and water.
I'm ready to drill a hole in the tank for the burner holder. From what I have read it should be about 15° off from top dead center.
For the bottom, I just have a common yellow fire brick, I took the grinder and "adjusted it" to fit the tank well. Need to make one more as the tank is about 12" inside. I don't plan to do any welding inside, but could add some ceramic board if that comes up.
Can I use ceramic tile on the sides? It would be nice to have some sides that can resist a bump or two.
I want to get the burner mounted asap and start working on the wool.
I will post pic's later tonight when I get home. Thanks
One more newbe building a gas forge, but with lot of pic's
in Gas Forges
Posted
I got the pipe welded in, sorry about the weld pic, the camera was set on black and white (kids)
I need to make a stand or feet and something to hold longer stock. Maybe add a small porch too.
Then I think I'm read to add the koawool.
Looks like I'm out of memory on this site, uploaded pics to a different site and it would not let me link them here.
so here the url sorry, until I figure how to post the pic's
http://www.pirate4x4...=1&d=1314073581
http://www.pirate4x4...=1&d=1314073581