A Combination Tool Stand/Mini Welding Table

[JHCC]

I saw this listed on my local Facebook Marketplace, and while I'm unlikely to purchase it myself, I suspect the folks here might appreciate a well-thought-out design. The seller's description reads:

Quote

This is my old all purpose blacksmithing table. I am unable to use it anymore so it will have to go. The dimensions are on the top in the pictures. But if its hard to see it is 40 inch tall 29 1/2 x 26 1/2 with a 3/8ths thick top. The top has some dents and dings on it but it is solid and repairable if you desire. The color difference on the top is just some oil that was sprayed on it. It has leveling feet a welding gun holder chisel, tong, hammer racks. I had a post vice mounted to it but it was removed.

And here are the photos:

Unfortunately, the seller doesn't have any other smithing items listed. C'est la vie.

[Gazz]

Perhaps no one has responded to this thread because the pictures are maybe 1/4" square and what can be seen is unidentifiable, at least on my pc.

[LeeJustice]

It is only showing that little image to the left of the link.  When I right click and select open image in new tab is reads "URL signature expired".

[Frosty]

The links are to an ad more than a year old and it was taken down a couple few days after John posted the links, when I checked.

Why is it still up here? When Glenn started Iforgeiron one of the base rules he established is no post will be deleted unless it is a gross violation of the rules. Sooooo, that's why we find a post that's dead in the real world every now and then.

Frosty The Lucky.

[Scott NC]

  Those photos were up there when he posted that.  I suspect that after things are sold, the photos are deleted.

    I will say, it was a nicely built work bench.