Need assistance to identify the Anvil I have

[Aubrey Frederick]

I came across a 125lb anvil in my fathers garage.  I cant seem to identify the manufacturer,  with the markings i can see. One the base it has 125then a 133380 number. It also has an H on the base of the horn and either a U or horseshoe stamp underneath the horn. I also have a Hardie tool with it. Just cant figure out the age or manufacture.  

[Nobody Special]

I'm not 100%, but that profile screams Hay Budden farrier anvil to me, and that serial marking would make it about 1908-ish, I think. You'd have to check with someone that has Anvils in America.

[Stash]

It's a Trenton, made by Columbus Forge and Iron Co, in 1915. Top of the line anvil, and she'll really sing- wear ear protection. Looks pretty good shape.

Steve

[Aubrey Frederick]

Whatt value would you place on it if you were to list it? And where wiuld be the best place to list it? 

[George N. M.]

This snvil is in pretty good shape and is a decent size.  New anvils can run $6-10/lb..  I'd say you could probably get $350-5/lb..  I'd ask $500 or $550 and allow myself to be bargained down to $450-500.  Check places like ebay or hibid to see what similar anvils are going for in your area.

I'd look up New York State Designer Blacksmiths and see if anyone in their group would be interested.  Alternatively, places like Craigs List, Etsy, Ebay, Facebook Market, etc. would have possibilities. Or even the tailgating section of IFI.

"By hammer and hand all arts do stand."

[JHCC]

With respect to George, I'd go a little higher. Where I am (Northeast Ohio), used anvils are going at $4-6/lb, so given the desirability of your anvil (good for most shop work and bladesmithing, not too big to travel to demonstrations) and its apparent condition, I'd ask $900 and be willing to get argued down to $600. 

That said, I'm in a fairly well-populated area that includes the city of Cleveland, so your local market conditions may vary. Still, it's better to ask to much and get less than ask to little and not get more.

[George N. M.]

I won't argue with John.  It's always easier to ask high and be bargained down.  If time goes by and you don't get your asking price you can always reduce it.  Part of the equation is how fast you want to sell it.

Or, you could keep it and learn the craft yourself.  It's a fun hobby that has given me lots of enjoyment for the last 45 years.

GNM

[JHCC]

Very true.

[swedefiddle]

Good Morning,

You found it in your Fathers Garage. You would like information about the Anvil, so can steal it or sell it? You are not interested in using it? Pity!! What is it worth to your Father?

Neil