Rashelle Posted February 8 Share Posted February 8 It's been awhile since I've been in and posted anything, other then an infrequent reply. So thought I'd show what I did yesterday. I'm recovering from shoulder surgery for the last year no haven't been doing much. Here goes: Quote Link to post Share on other sites
Rashelle Posted February 8 Author Share Posted February 8 Here it is handled. Have to clean up the top after the glue dries. I glue in my wood wedges, then drive a metal one in. Quote Link to post Share on other sites
Andrew C Posted February 9 Share Posted February 9 Nice looking axe! Quote Link to post Share on other sites
Rashelle Posted February 9 Author Share Posted February 9 Thank you. Here is the finished axe. Quote Link to post Share on other sites
Frosty Posted February 9 Share Posted February 9 Nice camp axe Rashelle. How's the shoulder doing? Frosty The Lucky. Quote Link to post Share on other sites
Rashelle Posted February 10 Author Share Posted February 10 Thank you Frosty. I'm able to use it a bit. Getting a chunk of range of motion back........ I was able to actually put my hand behind my back far enough to grab it with the left and pull it over the other day. Getting there working on it. It's only been a year since the surgery. Not medically stationary yet. The reason for me breaking down and buying that press. Pushing, but not too hard, at getting strength back. Am only at 25 incline pushups at a time now. When I'm doing sets of 100 or more pushups again I will consider myself almost back to before the injury. I'm only in my fifties, I think I can get at least that much back. Found out there was a biceps tear to go with all the shoulder tendons being torn. Slowly getting back, will see where I land. At least now I can spend some time hammering again with the right arm. When I was seeing the physical therapists all the time I told them my goal was not to just get to where I was but to get better then I was. Quote Link to post Share on other sites
ThomasPowers Posted February 10 Share Posted February 10 It can be fun working with PT folks used to "normal" folks. When I had a bone spur removed from my shoulder and went through PT; my therapist listened to my complaint that my arm was still weak and asked me to push against her braced body with it---as she started sliding across the floor I could tell that she had a very different concept of weak than a smith did... Quote Link to post Share on other sites
Frosty Posted February 10 Share Posted February 10 Ah yes, PT folk often need to adjust their methods. When I shattered my left elbow and started going to a place a couple miles from here. The therapist, Jeff was "stretching" my left elbow to get it to straighten as much as possible and kept stopping with barely a tug. I kept saying pull harder but he wouldn't. When I asked him why he said he might damage the tendons. I called bull and he said to pull on his hand as hard as I could. I was sitting on a therapeutical bench thingy and he was in a chair. The look on his face when I yarded his 220+lbs. right out of the chair one injured handed was a Kodak moment. There after he pulled on my elbow till his arms shook. Darned elbow still won't straighten all the way but it functions pretty well. Frosty The Lucky. Quote Link to post Share on other sites
ThomasPowers Posted February 10 Share Posted February 10 We'll just tell folks that it's a legacy of your days on the Pro Roller Derby circuit. Quote Link to post Share on other sites
Frosty Posted February 10 Share Posted February 10 That's the ticket! I shattered it on a particularly tough jammer's forehead! Ooooh the tales that invokes! Thank you! Frosty The Lucky. Quote Link to post Share on other sites
Rashelle Posted February 11 Author Share Posted February 11 The surgeon took care of the bone spurs and bursa while he was at it, placed anchors and staples. Potentially other then a unrelated small labral tear in there I might be better off. The PT's were glad when I came in as there was always progress. I really wanted my arm back......... and still do...... and m still working on it. I'm gonna get the camp axes dialed in then start working on some carving axes. Progress doesn't have to be leaps and bounds. Small steps forward add up. That goes for PT as well as blacksmithing and much else in life. Quote Link to post Share on other sites
Blackcloud Posted February 20 Share Posted February 20 I like it. Looks very nice plus a very usable profile. Quote Link to post Share on other sites
Rashelle Posted Wednesday at 12:37 AM Author Share Posted Wednesday at 12:37 AM Thank you Blackcloud. Here is a picture of the carving axe I did next: Quote Link to post Share on other sites
Daswulf Posted Wednesday at 12:40 AM Share Posted Wednesday at 12:40 AM That's a beauty of an axe Rashelle. Love the shape. Quote Link to post Share on other sites
WilCo Posted Wednesday at 01:09 AM Share Posted Wednesday at 01:09 AM Those look great Rashelle. Glad to hear you're making progress with your recovery; you were working left-handed when you taught the "Basics" class at Trackers I took Dec '19, pre-op I suppose. Quote Link to post Share on other sites
Rashelle Posted Wednesday at 03:51 AM Author Share Posted Wednesday at 03:51 AM Thanks Das I like it too. I'm still working out how to use the press to do what I need. Hey Wilco, yup that would of been about 2 months before the surgery. It's great to be seeing some of my former students doing stuff. I'm relearning to use my right. Tomorrow would be the one year anniversary of the surgery. Quote Link to post Share on other sites
Daswulf Posted Wednesday at 04:12 AM Share Posted Wednesday at 04:12 AM From seeing that and those, I'd say you have it down. Nice work. I can only imagine your PT. Best of luck with it. May it be as fine and finer than your work. Quote Link to post Share on other sites
CrazyGoatLady Posted Wednesday at 04:15 AM Share Posted Wednesday at 04:15 AM Wow great looking axe! Quote Link to post Share on other sites
Rashelle Posted Wednesday at 09:03 PM Author Share Posted Wednesday at 09:03 PM Thank you Das and GoatLady. I've got a long way to go Das. I have a friend who had got a 16 ton press and I used it and it was good. But I felt I was pushing it making hammers. So when I bought one for my ownself I got a 25 ton. That 9 ton difference made it harder for me to learn control. So I frequently have just a tiny too muchness in what I'm doing. And that tiny little bit makes it really hard to recover. Wish there was a throttle control so I could throttle down. As is I'll just have to keep at it till i learn sufficient control. Quote Link to post Share on other sites
ThomasPowers Posted Wednesday at 09:08 PM Share Posted Wednesday at 09:08 PM Like people using a powerhammer with a sticky clutch: wails of "Put it back". Learning *your* machine will help a lot. Quote Link to post Share on other sites
Rashelle Posted Thursday at 12:18 AM Author Share Posted Thursday at 12:18 AM Yup. I apparently am a slow learner Thomas. Heehee. Figure I'll get there sooner or later. Just got to keep at it till I start getting it right consistently, then keep at it some more. How you get from one place to another.......... One step at a time, even if they are stumbly steps down hill into a ditch. When you re a beginner at something....... you are a beginner. I am a beginner at learning to use a press. My next two axes are screwed up axes. But I finish them and learn along the wy. My redeeming feature is relearning to use a belt sander........... Those things can absolve one of a lot of sins, lol. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.