Jump to content

Kiln shelf as a flame face


Recommended Posts

My forge project is based on a 20# propane bottle. Lined with ceramic wool 2x1 in layers but with a space in the inner layer at the bottom for an extra thick layer of kastolite . Then I   Installed the burners so they aim at a tangent to the sides so as to get the swirl of gas which is reccomended. But now (duh) the flame face is further up the side where the kastolite is not as thick . Does it seem reasonable to place a 3/8 thick kiln shelf in the  forge such that it becomes the flame face?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...