Jump to content
I Forge Iron

Recommended Posts

This is my gas forge. When i started sevenish years ago, this forum taught me anything i needed to know. Thanks a bunch everyone.  I have now finished my newest forge. Hopefully it lasts. Roughly 1 1/2" thick cast with 1" wool wrap for added measure. Measures 10" wide on the floor by 8 " tall by 14" deep. I made the ribbon burner as many others have. With my 27 hole (i beleive) at 5/16",  it has a 2" opening in which the air and fuel are stuffed. The gas orifice is 1/16". I have yet to fully bring it up to temp. 

20200518_211529.jpg

20200518_204855.jpg

20200518_204917.jpg

20200913_161351.jpg

20200920_143108.jpg

20200921_172107.jpg

Link to post
Share on other sites

Turn everything down, it's burning a little rich AND the flames are off the burner block. As it stands you have too much blower, ease back and tune the gas for a neutral flame and you'll have a hotter forge with far less dragon's breath to heating shop.

Frosty The Lucky.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...