Jose Manuel Posted September 9, 2020 Share Posted September 9, 2020 Hola a todos .permitan que me presenté, soy José, de España estoy un poco desesperado por aclarar dudas que tengo de mi martillo pilon bechė 50kg ... De ante mano gracias a todos por estar en foros y dar todo tipo de conocimientos y sabiduría vuestra .. Mi gran duda es que en el cilindro delantero en la parte superior no se que lleva ahí tiene un agujero con tres tornillos como si llevase algún tipo de válvula, o bien un escape de aire .a ver si me podéis echar una mano ..muchas gracias un saludo jose Hello everyone. Allow me to introduce myself, I am José, from Spain I am a bit desperate to clarify doubts that I have about my 50kg pilon hammer bechė ... Thank you all in advance for being in forums and giving all kinds of your knowledge and wisdom. My great doubt is that in the front cylinder at the top I do not know what is there, it has a hole with three screws as if it had some type of valve, or an air leak. Let's see if you can give me a hand ... a lot thanks a greeting jose Link to comment Share on other sites More sharing options...
Glenn Gilmore Posted November 11, 2020 Share Posted November 11, 2020 Possibly to bolt a muffler to the hammer. Link to comment Share on other sites More sharing options...
Jose Manuel Posted December 16, 2020 Author Share Posted December 16, 2020 Muchísimas gracias Glenn Gilmore .por tu gran atención , y la ayuda que me aclaraste . Un saludo Thank you very much Glenn Gilmore. For your great attention, and the help that you clarified for me. a greeting Link to comment Share on other sites More sharing options...
OwenClarksonf Posted December 20, 2020 Share Posted December 20, 2020 Hey! Hello and welcome! in our time, such machines are no longer found ! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now