Justin Topp Posted July 23, 2020 Share Posted July 23, 2020 Made my first real propane forge. K26 in a steel shell 1/8” thick. Will get refractory coated soon. Forced air burner it gets hot! 216 cubic inches. 6x4x9 inch chamber. Nothing too fancy and definitely not pretty, but it does the trick very well. From cold steel about 5 minutes give or take to get 1.75” round up to forging temps Quote Link to comment Share on other sites More sharing options...
Frosty Posted July 23, 2020 Share Posted July 23, 2020 Looks HOT to me. Enjoy the warm glow of success. Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
Justin Topp Posted July 23, 2020 Author Share Posted July 23, 2020 Very! Thanks Frosty. I may have slightly melted the fire bricks. Time to order refractory I guess Quote Link to comment Share on other sites More sharing options...
Justin Topp Posted July 25, 2020 Author Share Posted July 25, 2020 Gas forge works ! Barely used any gas too making these two Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.