Jump to content
I Forge Iron

help with the math please.


Recommended Posts

I know there is a formula for this.  and if someone could please give me the formula I would greatly appreciate it.  I am making a new forge it will use 1" NA burners.  What size oriface do I need to drill for them to take 600 cubic inches to forge welding temp (under the assumption the forge is properly built and insulated).  Thank You.

Link to post
Share on other sites

I put a 0.045 mig contact tip in a 1" T burner but I don't know what size hole to drill. I haven't drilled a gas jet in I don't remember how long. I determined mig tip size through trial and error. 

Frosty The Lucky.

Link to post
Share on other sites

I don't think there is a formula, at least I've never seen one. Like Frosty, I started with an orifice size of .0625  which was way too large. I then changed to an orifice size .025 which was too small. Then started drilling the orifice out one drill bit size at a time until settling on .036 which is perfect for our burner in our forge.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...