caintuckrifle Posted March 9, 2020 Share Posted March 9, 2020 I recently bought a Champion 400 riveters forge. It may have another numerical designation but it's a generic riveters forge with the 400 blower. Unfortunately the blower is held to the forge with a big homemade "U" bolt. Does anyone know how the blower was originally fixed to the forge? Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted March 9, 2020 Share Posted March 9, 2020 Picture? I know a bunch of different ways blowers were mounted to rivet forges... You might also check out some of the old catalogs for pictures. Also are you sure that blower goes to that forge? I hook up my favorite hand crank to any forge I am using---or even switch it out with a smaller one for when I am travelling with it. Quote Link to comment Share on other sites More sharing options...
pnut Posted April 9, 2020 Share Posted April 9, 2020 A four hundred On 3/9/2020 at 12:00 PM, ThomasPowers said: Also are you sure that blower goes to that forge? It does seem like a little much for a rivet forge. I haven't looked at any catalogues in a while so I can't say for sure if they offered a rivet forge #400 blower combo. Pnut. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.