Jump to content
I Forge Iron

Recommended Posts

Greetings everyone! Is west Systems 40 a good ridgidizer for kaowool? Do I just mix and apply like paint if so? I know it’s been covered a little before but I wanted some definite info on it. I am building a ribbon burner forge and I would like to ridgidize the wool before coating with kastolite and metrikote. Thanks, Joe

Link to post
Share on other sites

Welcome aboard Joe, glad to have you. Not knowing what West Systems 40 is I first searched in online, and read the marketing info so I just added MSDS (Material Safety Data Sheet) to the terms to learn what it's made of. The sheet was specifically for the 406 version and it's colloidal silica. BINGO its THE stuff.

I don't know the ratio but it's most effective mixed with enough clean water to spray through a stritzer. If you add a drop or two of food coloring it gives you a god visual cue about coverage.

Stritz the refractory blanket with water (butter) first. This lets the silica bond to the refractory and flow more deeply. Applying rigidizer or any masonry type product to a dry surface causes flash drying at the contact so there's a layer of dry powder between the cement and what you want it to stick to. This is a BAD thing. Applying it to a wet surface allows it to flow into the surface and cure rather than dry for a good molecular bond. If you've ever watched masons laying brick or concrete block you've seen them dipping bricks/blocks in a bucket of water before laying them on the mortar. 

Butter before applying the Kastolite and Matrikote for the exact same reason. Remember Matrikote works MUCH better applied in several (with drying time and butter between) coats. Mix about latex paint thickness. 

Frosty The Lucky.

Link to post
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...