Sign in to follow this  
DannyE

Electric Motor Wholesale

Recommended Posts

Has anyone had any luck with this company? I called them and asked for a motor for my 2x72 sander and they recommend a motor that I went ahead and ordered. After getting the motor and installing it I now see that the motor bogs down and has no torque it comes to a stop as soon as I put metal on the belt. 

I have called and left 3 voicemails since Monday, and I have sent a few email to customer service and no one will respond.

i feel like they just hope I go away. After spending almost $400 You would think they would try to help resolve this, especially since it’s what they recommend.

if anyone has a good company that I can get a motor from (with better customer service) please let me know.

thanks for your help.

 

Share this post


Link to post
Share on other sites

Here is the tag from the motor they recommended.

Thanks for any advice :)

I also should say that I’m running a VFD, a KBAC 29

17F6C57E-E3F3-4284-8FE2-92C462B399CF.jpeg

Share this post


Link to post
Share on other sites

Do you have the appropriate 3 phase power with the correct voltage?

Share this post


Link to post
Share on other sites

Yeah, the VFD is setup correctly for this new motor. I had a 3 HP before I ordered the 2HP and the 3 HP ran for a long time with no issues. The 3HP was not TEFC so I knew it would go out eventually, but I used it because it was a free motor.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this