Jump to content
I Forge Iron

Forge-finished finery, bush swords, etc.

Recommended Posts

Been busy banging out bodadacious blades.  Here are some recents.  80CrV2 steel, cord wraps, and Boltaron sheaths all around.

A biohazard outbreak reaction bush sword and smaller utility knife that went to a repeat customer in Canada.  The bush sword has scorched hemp for the main wrap and black paracord Turk's head knots.  The smaller knife has tan paracord over hemp, with a black paracord Turk's head.


A similarly-sized (6"~ blade) knife as the above utility, with hemp.


Variations on Benghazi Warfighters, two with sharpened upper edges.







A Benghazi Warfighter with black oxide finish, headed to an Army Ranger.  He had commissioned a bigger chopper/fighter from me a few years ago, a variation of my Aggression design (I need to make some more of those).  We decided this was a "micro-Aggression" and the sheath is a "safe space" from it.  :D He can't tell me yet where he's deploying, but this is going with him.




A couple of donation blades, the first for Knife Rights in their continued fight to remove restrictions on the ability of law-abiding citizens to carry arms in the United States.  This year, a falcata-ish bush sword with retina-searing neon orange underlay.


I don't realize how big my hands look until I take a picture of me holding a blade.


And a much smaller donation knife for my old high school, raising funds for teacher projects that run outside the school budget.



One of the most useful comments I've had on my work came years ago when a knife dealer told me my blades were good but my sheaths sucked.  I have worked to make that better, and think I have achieved a decent level of workmanlike sheaths.



And finally, the first oxtail dao I've done in a long time.  The customer had as reference a picture of one I built many years ago.


Here's what I came up with for him.  He was quite taken with the results.


I'd say I've improved through the years.  The top edge is fully sharpened on the new one.


The design called for an open-backed sheath.


Ok, headed to the shop to work on some carcass splitters.  :)

Share this post

Link to post
Share on other sites

The bush sword with the hemp handle is my favourite....the straight point combined with the recurve looks nasty:ph34r:

...and the open back kydex sheath is super...less wide and well proportioned.

Share this post

Link to post
Share on other sites

I really like the wrapped handles.  I tried a couple of times.  Watched the videos on how to do it, got started and then the brain went spazo!  I could not get it right for nothing.  Yours are all well done. 

Share this post

Link to post
Share on other sites

Thank y'all!


Neilyeag - I have no natural skill in that direction, but I'm extremely stubborn!  :D

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...